High-performance copper conductor PVC industrial cable designed for robotic and high-flex data transmission applications, featuring customizable communication wire solutions.
Performance Specifications
- Exceeds ANSI/TIA-568.2-D Category 6A and ISO/IEC 11801 Class EA standards
- Complies with YD/T 1019 standard
- Bandwidth: ≥500 MHz
- Supports 10G Base-T with backward compatibility for CAT6 and CAT5e systems
Technical Parameters & Characteristics
- Wire gauge: 23AWG
- Conductor material: 99.99% oxygen-free copper
- Insulating material: High density polyethylene (HDPE)
- Outer sheath material: PVC (Low smoke halogen-free LSZH optional)
- Customizable options: CM/CMR/CMP available
- Cable outer diameter: 7.8±0.5mm
- Core structure: Cross keel core
- Jacket color: Customizable
- Gross weight: 17.9Kg
- Maximum tensile force: 110N
- Installation temperature: 0°C to +50°C
- Operating temperature: -20°C to +60°C
Product Images
Network UTP Patch Cords
Our UTP patch cords feature high-performance modular plugs with snagless design to protect RJ45 connector locking clips during installation.
CAT5e UTP Network Patch Cords
| Cable Type |
Cat5e Snagless |
| Shielding Type |
Unshielded (U/UTP) |
| Cable Jacket |
PVC CM (Round) |
| Length |
3ft (0.9m) Including Plugs |
| Data Rate Support |
10/100/1000Base-T |
| Standard Bandwidth |
100MHz |
| Conductor Type |
Stranded Pure Bare Copper |
| Connectors |
RJ45 (Male) |
| Gauge (AWG) |
24 (7/0.20mm) |
| Cable Outer Diameter |
5.5± 0.4mm |
| PoE Compatibility |
PoE/PoE+ |
| Wire Scheme |
T568B, Straight |
| Operating Temperature |
-20°C to +75°C (-4°F to 167°F) |
| Installation Temperature |
-10°C to +50°C (14°F to 122°F) |
CAT6 UTP Network Patch Cords
| Cable Type |
Cat6 Snagless |
| Shielding Type |
Unshielded (U/UTP) |
| Cable Jacket |
PVC CM (Round) |
| Length |
3ft (0.9m) Including Plugs |
| Data Rate Support |
1000Base-T and Maximum to 10GBase-T |
| Standard Bandwidth |
250MHz |
| Conductor Type |
Stranded Pure Bare Copper |
| Connectors |
RJ45 (Male) |
| Gauge (AWG) |
24 (7/0.20mm) |
| Cable Outer Diameter |
6.1 ± 0.4mm |
| PoE Compatibility |
PoE/PoE+ |
| Wire Scheme |
T568B, Straight |
| Operating Temperature |
-20°C to +75°C (-4°F to 167°F) |
| Installation Temperature |
-10°C to +50°C (14°F to 122°F) |
Mechanical Parameters
| Parameter |
PVC |
LSZH Low Smoke Halogen-Free |
| Tensile strength before aging |
≥13.5Mpa |
≥10.0Mpa |
| Elongation before aging |
≥150% |
≥125% |
| Aging time |
100℃ * 24 hours * 7 days |
| Tensile strength after aging |
≥12.5Mpa |
≥8Mpa |
| Elongation after aging |
≥125% |
≥100% |
| Cold bending (-20±2℃ * 4 hours) |
8 times the outer diameter of the cable without cracking |
Electrical Parameters
| Transmission delay difference |
≤25ns / 100m |
| Transmission speed |
74% |
| Unbalanced capacitance to ground |
Maximum 330pf / 100m |
| DC resistance |
Maximum 9.5Ω / 100m |
| DC resistance unbalance |
Maximum 2% |
Manufacturer Profile
Linke Cable Technology Co., Ltd is a leading cable manufacturer in China with over 10 years of experience in R&D, production, and marketing of wire and cable solutions.
We specialize in providing custom cable solutions including EV charging cable, medical cable, silicone cable, spring cable, braided cable, towlobe cable, UL wire, automotive cable, and more for global markets.
| Brand |
LINKE |
Cross Section (mm²) |
0.01-500mm² |
| Wire Gauge (AWG) |
[e.g., 24AWG, 28AWG] |
Conductor |
Tinned Copper /bare copper, based on client's requirements |
| Insulation material |
PVC/TPU/Silicone rubber/PE/PP/XLPE/Nylon/other |
Jacket Material |
[PVC/PU/Rubber/Braid/etc.] |
| Certifications |
RoHS/REACH/UL/CE/IP68/etc |
Custom Length |
[e.g., 1m, 3ft, 5m ±5% tolerance] |
| Cable Type |
[Medical/Power/Audio/Coaxial/Electrical/Automotive/Energy storage//etc.] |
Shielding |
[Shielded/Unshielded/Braid Shield] |
| Impedance |
[e.g., 75Ω (for coaxial cables)] |
Printing/Logo |
[Text/Label/Logo, max. 20 characters] |
| Bend Radius |
[e.g., ≥5× cable diameter] |
Current Rating |
[e.g., 5A] |
| Voltage Rating |
[e.g., 30V AC/DC] |
Connector Material |
[Gold-plated/Nickel-plated/Brass/etc.] |
| Connectors |
[e.g., USB Type-C, 3.5mm Jack, RJ45] |
Jacket |
XLPE or PE or PVC RUBBER |
| Delivery Time |
7-14 days after confirming the order |
Colors |
[Black/White/Red/Custom Pantone/etc.] |
| temperature |
Minus-70℃to 350℃(-70℃ ~ 350℃) |
Package |
Roll/box/plate/Custom |
| Supporting Services |
multicolumn {3}{l}{custom cable, end to end solutions, including precise cutting, crimping and installation of lugs (specify material,e.g.,copper/nickel plated) |
|
|
|
No.
|
Test Item
|
Test Condition
|
Test Requirement
|
Test Data
|
Result
|
|
1
|
Structure Inspection
|
1. Comply with wire size table2. Minimum thickness ≥ 80% of average thickness
|
Comply with wire size table
|
Refer to test record
|
Pass
|
|
2
|
Thermal Shock
|
Wind the sample on an iron rod of specified size, place in an aging oven at specified temperature for 1 hour, cool the sample to room temperature for at least 30 minutes, then observe the sample
|
No cracks on the sample surface
|
No cracks
|
Pass
|
|
3
|
Heat Deformation
|
1. Measure sample thickness (mark measurement position)2. Place sample and test fixture in aging oven for preheating at specified temperature for 1 hour3. Place sample under pressure column of test fixture for 1 hour4. Re-measure sample thickness at the same position
|
1. Sample shall not be cracked by pressure column or expose conductor2. Thickness reduction ≤ 50%
|
Refer to test record
|
Pass
|
|
4
|
FT2
|
Apply a standard flame at a height of 125mm once
|
1. Flame shall not propagate along its length2. Flame shall not spread to nearby flammable materials
|
Refer to test record
|
Pass
|
|
5
|
Aging
|
1. Take five sections of 200mm-long sheath2. Place specimens in aging oven at 158℃ for 168 hours3. After taking out specimens, place at room temperature 23±5℃ for 16 hours, then test elongation at break and tensile strength
|
1. Elongation before aging ≥ 300%, elongation after aging ≥ 80% of that before aging2. Tensile strength before aging > 1.41kg/mm², tensile strength after aging ≥ 80% of that before aging
|
Refer to test record
|
Pass
|
|
6
|
Cold Bend
|
Store sample in low-temperature box at specified temperature for 4 hours, wind sample on iron rod of specified size with specified turns, complete winding within 30 seconds after sample is taken out of low-temperature box
|
No cracks on the sample surface
|
No cracks
|
Pass
|
|
7
|
Conductor Resistance
|
Measure resistance of one-meter core conductor with DC resistance meter
|
At 20℃, resistance of 8AWG ≤ 2.23Ω/km
|
Refer to test record
|
Pass
|
Certifications & Standards
Our products meet rigorous quality standards and hold numerous certifications:
UL Certifications
Single conductor, thermoplastic insulation: UL1007, UL1185, UL1672, UL10070, UL10483, UL1015, UL1569, UL10012, UL10269
Multiple-conductor, thermoplastic insulation
UL2095, UL2129, UL2468, UL2586, UL2725, UL20233, UL20280, UL20963, UL2103, UL2463, UL2517, UL2587, UL2835, UL20276, UL20549, UL21198, UL2104, UL2464, UL2576, UL2661, UL2919, UL20279, UL20886, UL21664
Additional certifications: ISO9001, ISO13485, TS16949, CNR Appliance Wiring Material
Frequently Asked Questions
Are you a manufacturer or trading company?
We are a professional manufacturer controlling all aspects of production from beginning to end. We welcome visits to our facility in Shenzhen.
How can I get a sample to test your quality?
Samples are free for evaluation. New clients are expected to pay for courier costs.
What's your Minimum Order Quantity?
Normally 100m. Due to cable weight, we recommend ordering suitable quantities to optimize freight costs. Sea transportation is recommended for larger orders.
Can I get a discount?
Discounts are available based on order quantity. Please contact us for pricing details.
Does your company accept OEM production?
Yes, we offer OEM services including custom printing of company names and quality cards.
For more information, please feel free to contact us!
Your message must be between 20-3,000 characters!
