UL 40A 50A 3x8AWG+1x18AWG EV Charger Cable
Electrical Specifications
- Rated current: 16A
- Working voltage: 250V AC
- Insulation resistance: >1000MΩ
- Thermal temperature rise: <50K
- Withstand voltage: 2000V
- Working temperature: -30℃ to +50℃
- Compliant with IEC 62196-2 Electric Vehicle Charger Cable Standards
Product Overview
UL standard single-phase 32A electric vehicle charging cable 3*10AWG+1*18AWG
EV charging cable is a flexible cable that connects electric vehicles to charging stations or power sockets. Featuring high-quality oxygen-free copper conductors for excellent conductivity, TPE insulation material that is both soft and durable, and a high-performance TPE sheath with weather resistance, high/low temperature tolerance, and friction resistance. The cable offers superior flexibility, elasticity, high bending capability, and maintains performance in low temperatures without hardening.
Technical Specifications
| Component |
Specifications |
| Conductor |
Material: Bare copper
Rated temperature: -40℃ to 105℃
Rated voltage: 300V; 600V or 1000V |
| Insulation |
Material: TPE or PVC
Color: Black, White, Green/Yellow
Flame Test: VW-1 test method per UL 2556
Minimum bending radius: ≥5*OD
Dielectric voltage: 1.5kVac/1min per UL 2556
Cold bending: -40℃/4h no crack per UL 2556
Thermal shock: 150℃/1h no crack per UL 2556 |
| Filling |
Material: PP wire
Oil resistance: IRM902, 60℃/168h tensile elongation ≥70% unaged value |
| Tape |
Material: Non-woven fabric
Compressive strength: S≤12AWG 4.45kN, 12AWG＜S≤2AWG 11.1kN, 2AWG＜S 15.6kN |
| Sheath |
Material: TPE or PVC
Color: Black or Orange
Weather resistance: 720h xenon arc lamp test, no cracks
Environmental compliance: RoHS 2.0 and REACH |
| Brand |
LINKE |
Cross Section (mm²) |
0.01-500mm² |
| Wire Gauge (AWG) |
[e.g., 24AWG, 28AWG] |
Conductor |
Tinned Copper /bare copper, based on client's requirements |
| Insulation material |
PVC/TPU/Silicone rubber/PE/PP/XLPE/Nylon/other |
Jacket Material |
[PVC/PU/Rubber/Braid/etc.] |
| Certifications |
RoHS/REACH/UL/CE/IP68/etc |
Custom Length |
[e.g., 1m, 3ft, 5m ±5% tolerance] |
| Cable Type |
[Medical/Power/Audio/Coaxial/Electrical/Automotive/Energy storage//etc.] |
Shielding |
[Shielded/Unshielded/Braid Shield] |
| Impedance |
[e.g., 75Ω (for coaxial cables)] |
Printing/Logo |
[Text/Label/Logo, max. 20 characters] |
| Bend Radius |
[e.g., ≥5× cable diameter] |
Current Rating |
[e.g., 5A] |
| Voltage Rating |
[e.g., 30V AC/DC] |
Connector Material |
[Gold-plated/Nickel-plated/Brass/etc.] |
| Connectors |
[e.g., USB Type-C, 3.5mm Jack, RJ45] |
Jacket |
XLPE or PE or PVC RUBBER |
| Delivery Time |
7-14 days after confirming the order |
Colors |
[Black/White/Red/Custom Pantone/etc.] |
| temperature |
Minus-70℃to 350℃(-70℃ ~ 350℃) |
Package |
Roll/box/plate/Custom |
| Supporting Services |
multicolumn {3}{l}{custom cable, end to end solutions, including precise cutting, crimping and installation of lugs (specify material,e.g.,copper/nickel plated) |
|
|
Independent Laboratory • Complete Testing Equipment • Full Quality Control
We test every product by strict standards to ensure superior quality and reliable performance.
|
No.
|
Test Item
|
Test Condition
|
Test Requirement
|
Test Data
|
Result
|
|
1
|
Structure Inspection
|
1. Comply with wire size table2. Minimum thickness ≥ 80% of average thickness
|
Comply with wire size table
|
Refer to test record
|
Pass
|
|
2
|
Thermal Shock
|
Wind the sample on an iron rod of specified size, place in an aging oven at specified temperature for 1 hour, cool the sample to room temperature for at least 30 minutes, then observe the sample
|
No cracks on the sample surface
|
No cracks
|
Pass
|
|
3
|
Heat Deformation
|
1. Measure sample thickness (mark measurement position)2. Place sample and test fixture in aging oven for preheating at specified temperature for 1 hour3. Place sample under pressure column of test fixture for 1 hour4. Re-measure sample thickness at the same position
|
1. Sample shall not be cracked by pressure column or expose conductor2. Thickness reduction ≤ 50%
|
Refer to test record
|
Pass
|
|
4
|
FT2
|
Apply a standard flame at a height of 125mm once
|
1. Flame shall not propagate along its length2. Flame shall not spread to nearby flammable materials
|
Refer to test record
|
Pass
|
|
5
|
Aging
|
1. Take five sections of 200mm-long sheath2. Place specimens in aging oven at 158℃ for 168 hours3. After taking out specimens, place at room temperature 23±5℃ for 16 hours, then test elongation at break and tensile strength
|
1. Elongation before aging ≥ 300%, elongation after aging ≥ 80% of that before aging2. Tensile strength before aging > 1.41kg/mm², tensile strength after aging ≥ 80% of that before aging
|
Refer to test record
|
Pass
|
|
6
|
Cold Bend
|
Store sample in low-temperature box at specified temperature for 4 hours, wind sample on iron rod of specified size with specified turns, complete winding within 30 seconds after sample is taken out of low-temperature box
|
No cracks on the sample surface
|
No cracks
|
Pass
|
|
7
|
Conductor Resistance
|
Measure resistance of one-meter core conductor with DC resistance meter
|
At 20℃, resistance of 8AWG ≤ 2.23Ω/km
|
Refer to test record
|
Pass
|
Linke cable technology (DongGuan) Co. Ltd. concentrate on R&D and
provide professional solutions to the Cable&Wire,especially for the
different industry customers.It contains :
Humanoid robot cable,
AI power cable/data cable,
Semiconductor cable/industrial automatic cable,
Sensor cable,
New energy cable,
Medical beauty wire,
UL wire cable,
Linke Cable has diversified product development capabilities and technical capabilities to support diversified
customer needs. We have obtained the following product authorization:UL 758,CCC,RoHs,REACH,CE; We
have obtained the following quality management system:ISO 9001-2015(All products); ISO 13485
(Medical apparatus and instruments),IATF 16949(Auto industry)
Company Capabilities
We maintain a strong R&D team with 6 engineering professionals, each possessing over 10 years of wire and cable technology experience. Our engineering department provides professional cable solutions to ensure accurate and effective customer support. The quality control department includes 10 specialists who strictly supervise every step from incoming materials to shipping, guaranteeing 100% product quality. Our production team consists of over 50 experienced manufacturing professionals.
Frequently Asked Questions
Are you a manufacturer or trading company?
We are a professional manufacturer. We manage your order from beginning to end. Welcome to visit us - we provide pickup service in Shenzhen.
How can I get a sample to test your quality?
Samples are provided free of charge. New customers are responsible for courier costs.
What's your Minimum Order Quantity?
Normally 100 meters. However, due to the cable's weight, we recommend ordering suitable quantities to minimize freight costs. Sea transportation is the most economical option.
Can I get a discount?
Discounts are available based on order quantity. We may also cover freight costs. Please contact us for details.
Does your company accept OEM production?
Yes, we offer OEM services including printing your company name and custom quality cards to promote your brand.
Your message must be between 20-3,000 characters!
